Huntingdon Fusion Techniques HFT®’s Technical Articles

Huntingdon Fusion Techniques share their Technical Knowledge. Since the 1970’s our Technical Experts have used their scientific knowledge to research and develop our Weld Purging Technology, which we continue to do with the help of our customers.

Huntingdon Fusion Techniques work closely with Dr Michael Fletcher of Delta Consultants. Dr Fletcher is a qualified Welding Metallurgist with extensive experience in welding and non-destructive testing. He works as an independent consultant providing support to a wide range of manufacturing industries on a global basis.

Whether you own and work with our products, or you are connected with the field of Weld Purging, we have a catalogue of Technical Articles available for public viewing.

Here are some of our highlights:

Seven Tips for Weld Purging:

This article covers all the basics to Weld Purging. Whether you are new to the field or just need to update your knowledge. From which purging systems to use to how to monitor the oxygen level.

Welding Reactive Metals:

If you are welding reactive metals such as zirconium, titanium or beryllium, we have put an article addressing the reactive nature of these metals and how to avoid oxidation.

Titanium in Motor Sport:

Are you welding titanium? This White Paper, written specifically for the motor sport industry will give you some great information on how to weld reactive metals, whilst maintaining the lowest oxygen level possible, achieving oxide-free, zero colour welds every time!

Advances in Weld Purge Gas Oxygen Monitoring Technology:

Find out how to monitor the oxygen level during, before and after welding and which monitor would be right for you!

There is a whole host of articles about weld purging of different materials and different applications on our Technical Support section on our website.

If you would like to receive any additional information or even suggest a topic that we could help by writing a technical article for, then get in touch.

There are no comments yet, add one below.

Leave a Comment

Your email address will not be published. Required fields are marked *